FUSION SAIL . . .
After launching more than twenty Fusion 40s since its first introduction in 2004, Fusion now introduces the new Fusion 40 Private, a fully fitted out, performance cruiser..

Modifications to the Fusion 40 have been made in many areas -- ergonomic, comfort, maneuverability - and the new version has even more standard equipment.

All primary sail control lines, including the main halyard and reefing lines, can now be brought back to the cockpit where the option of an electric winch increases the ease, efficiency and safety of managing mainsail loads.

Movement between the steering station, the cockpit and the main salon remains free and open. The comprehensive navigation area, the immense main salon with its unique panoramic view, and the large modern galley show clearly that the Fusion 40 Private is designed for long, comfortable performance cruising. The "Owner's" version of the boat has three cabins with the port hull designed for maximum comfort of the captain.

There are more than 12 variations available in the Layouts, contact us for more:


WHY FUSION . . . .

The Perfect all round Catamaran!

1. Production, molded, Gel Coated Foam/Glass
2. Molded Non Skid to walk areas
3. Accommodates min. 6 Adults
4. Excellent windward performance
5. Easily handled sail plan
6. Able to be Beached easily
7. Inboard Diesel reliability
8. Good Bridgedeck clearance
9. Easy dinghy forward, access
10. Excellent 360deg. saloon visibility
11. Radiused aft beam for better sheeting
12. Round Chamfers for softer motion
13. Single step hull design for safer decks
14. Galley up or Galley down choices
15. 1, 2 or 3 heads/showers

Specifications
L.O.A 12.2 metres 40ft
B.O.A 7.2 metres 23’6”
Draft 1 metre 3’2”
Headroom in hulls 1.95 metres 6’4”
Headroom in bridgedeck 1.95 metres 6’4”
Mast height 17.260 metres
Sail area (main + headsails) 157 sq mts
Payload 1850 kilograms
Displacement 5,750 kilograms
Displacement Light Ship 4,125 Kilograms
B/Deck clearance 800mm
Fuel capacity 400 litres
Water capacity 800 litres
Motors 2x20 or 30hp Diesel Saildrives
Motoring speed - cruising 8 knots
Motoring speed - top 9.5 knots
Sailing speed - cruising 10+ knots
Finishing time (approx) 3000 hours
Cost of finishing materials (estimate) $118,000 estimate

Internal Fitout:

The Fusion 40 can be supplied straight off the shelf as a finished Cruiser for under $600,000 (inc GST), or it can be customised to suit your particular needs. The interior furniture can be produced in a variety of finishes such as a lightweight Timber Grained Lamipanel (foam Cored), Lovely Veneers with a high gloss 2 pot polyurethane finish or a gelcoat moulded finish for easy care.

Some examples of these finishes are seen here:

If you would like any information on the Fusion 40 range of Catamarans, please email us at sales@emultihulls.com